Publications


Papers | Dissertations

Here you can find the papers of the Institute of Production Engineering.

2023


Güner, M.; Lang, S.-E.; Bähre, D.
Influence of selective process interfering on the workpiece fixture dynamics in precision honing
51th SME North American Manufacturing Research Conference (NAMRC 51), New Brunswick (New Jersey, USA), Manufacturing Letters, Volume 34, pages 314-320, DOI: 10.1016/j.mfglet.2023.08.071, 2023

Fang, S.; Colominas, C.; Pauly, C.; Salán, N.; Llanes, L.
Indentation and sliding contact testing of three laser-textured and PVD-coated cemented carbide tools
Surface and Coatings Technology, Volume 473, DOI: 10.1016/j.surfcoat.2023.129986, 2023

Ghasemiansafaei, M.; Schaefer, F.; Hall, T.; Baehre, D.
Analysis of Mechanisms Affecting the Tool in Pulsed Electrochemical Machining
Journal of The Electrochemical Society, Volume 170, Number 6, 2023, DOI: 10.1149/1945-7111/acd87a

Fang, S.; Frank, A.; Schäfer, M.; Bähre, D.
Implementation of a Picosecond Laser for Micromachining the Cathode of Pulse Electrochemical Machining and a Case Study
Journal of Micro and Nano-Manufacturing, Volume 10, Issue 4, DOI: 10.1115/1.4063178, 2023

2022


Fang, S.; Bähre, D.
Herstellung strukturierter Werkzeuge aus Hartmetall für Anwendungen bei der abrasiven Oberflächenbearbeitung
Jahrbuch Schleifen, Honen, Läppen und Polieren/70. Ausgabe, Seiten 49-60, ISBN 978-3-8027-3176-1, 2022

Güner, M.; Klein, H.; Bähre, D.
Einfluss der Masseverteilung auf die Vorrichtungsdynamik beim Langhub-Innen-Rundhonen
Jahrbuch Schleifen, Honen, Läppen und Polieren/70. Ausgabe, 2022

Fang, S.; Salán, N.; Pauly, C.; Llanes, L.; Mücklich F.
Critical Assessment of Two-Dimensional Methods for the Microstructural Characterization of Cemented Carbides
Journals Metals, Volume 12(11) 1882, DOI: 10.3390/met12111882,2022

Fang, S.; Salán, N.; Llanes, L.
Rapid Verification of Two Important Microstructural Parameters of Cemented Carbides Through Two-dimensional Characterization
World PM2022 Congress Proceedings, European Powder Metallurgy Association (EPMA), ISBN 978-1-899072-55-2, Oct 9-13, Lyon, France, 2022

Güner, M.; Lang, S.-E.; Herter, F.; Bähre, D.
Analysis of the Dynamic Behaviour of a Structurally Optimized Gimbal - Mounted Workpiece Fixture in Precision Honing
50th SME North American Manufacturing Research Conference (NAMRC 50), West Lafayette (Indiana, USA), Manufacturing Letters, Volume 33, pages 622-629, ISSN 2213-8463, DOI: 10.1016/j.mfglet.2022.07.077, 2022

Güner, M.; Daniel, M.; Bähre, D.
Approach and Development of a Methodology for Machining of Shapes in Cylindrical Bores by Precision Honing
50th SME North American Manufacturing Research Conference (NAMRC 50), West Lafayette (Indiana, USA), Manufacturing Letters, Volume 33, pages 365-372, ISSN 2213-8463, DOI: 10.1016/j.mfglet.2022.07.044, 2022

Maurer, O.; Herter, F.; Bähre, D.
The impact of manufacturing parameters on corrosion resistance of additively manufactured AlSi10Mg-samples: A design of experiments approach
Manufacturing Letters, Volume 34, pages 29-33, ISSN 2213-8463, DOI: 10.1016/j.mfglet.2022.08.006, 2022

Fang, S.; Salán, N.; Colominas, C.; Llanes, L.; Bähre, D.
Multifunctional Testbench Construction and Tribological Study of Laser-Coated Cemented Carbide Tools
Extended Abstract, 7th World Tribology Congress, WTC 2022 July 10-15, Lyon, France, 2022

Fang, S.; García Marro, F.; Salán, N.; Colominas, C.; Bähre, D.; Llanes, L.
Laser Impact on Contact Responses of Coated Cemented Carbides
Extended Abstract, 7th World Tribology Congress, WTC 2022 July 10-15, Lyon, France, 2022

Schäfer, F.; Rosar, J.; Marx, M.; Herter, F.; Wu, H.; Starke, P.
Quantitative Thermometry: A Revived Simplified Approach to Fatigue Strength Determination and Deformation Mechanisms
Procedia Structural Integrity, Volume 37, pages 299-306, ISSN: 2452-3216, DOI: 10.1016/j.prostr.2022.01.088, 2022

Bronder, S.; Herter, F.; Bähre, D.; Jung, A.
Optimized design for modified auxetic structures based on a neural network approach
Materialstoday COMMUNICATION, Volume 32, ISSN: 2352-4928, DOI: 10.1016/j.mtcomm.2022.103931, 2022

Maurer, O.; Herter, F.; Bähre, D.
Tolerancing the laser powder bed fusion process based on machine capability measures with the aim of process control
Journal of Manufacturing Processes, Volume 80, pages 659-665, ISSN 1526-5125, DOI: 10.1016/j.jmapro.2022.06.031, 2022

Fang, S.
Validation of cemented carbide tools textured by ultrashort pulse laser through surface and force measurement under honing-like conditions
CIRP Journal of Manufacturing Science and Technology, Volume 37, pages 559-569, ISSN 1755-5817, DOI: 10.1016/j.cirpj.2022.03.005, 2022.

Schorr, S.; Bähre, D.; Schütze, A.
Assessment of quality predictions achieved with machine learning using established measurement process capability procedures in manufacturing
Magazine tm - Technisches Messen, Oldenbourg Wissenschaftsverlag, DOI: 10.1515/teme-2021-0125, 2022.

2021


Hall, T.; Herter, F.; Zeiner, M.; Bähre, D.
Experimental study on removing support structures of additively manufactured metal parts using pulse electrochemical machining
Proceedings of the 17th International Symposium on Electrochemical Machining Technology, pp. 177-184, ISBN 978-9-08289-313-7, Leuven (Belgium), November 25 to 26, 2021.

Zeiner, M.; Hall, T; Bähre, D.
Experimental investigation of the electrochemical dissolution behavior of high-purity nickel and its microstructural influence on the work result
Proceedings of the 17th International Symposium on Electrochemical Machining Technology, pp. 109-115, ISBN 978-9-08289-313-7, Leuven (Belgium), November 25 to 26, 2021.

Mankeekar, T.; Bähre, D.; Durneata, D.; Hall, T.; Lilischkis, R.; Natter, H.; Saumer, M.
Fabrication of micro structured tools for the production of curved metal surfaces by pulsed electrochemical machining
The International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-021-08146-4, 2021

Fang, S.; Frank, A.
A Metallographic Preparation Method for Three-Dimensional Microstructural Characterization of Machining Chips
Practical Metallography, Vol. 58, no. 10, 2021, pp. 644-661, DOI: 10.1515/pm-2021-0056, 2021

Maurer, O.; Liborius, H.; Rauch, C.; Bähre, D.; Schubert, A.
Influence of Cutting Speed in Turning and Force in Subsequent Diamond Smoothing on Magnetic Properties of Steel 100Cr6
Metals, Volume 11(7), pages 1131-1147, ISSN 2075-47011, DOI: 10.3390/met11071131, 2021

Bronder, S.; Herter F.; Röhrig, A.; Bähre, D.; Jung, A.
Design Study for Multifunctional 3D Re-entrant Auxetics
Advanced Engineering Materials, DOI: 10.1002/adem.202100816, 2021

Klein, S.; Güner, M.; Bähre, D.
Simulation Tool and Analysis of the Interaction of the Gimbal in Precision Honing
Procedia CIRP of the 9th CIRP Conference on High Performance Cutting (HPC), Volume 101, pages 130-133, ISSN 2212-8271, Sheffield (UK), May 24-26 May 2021, DOI: 10.1016/j.procir.2021.03.127, 2021

Schorr, S.; Möller, M; Heib, J.; Bähre, D.
Comparison of Machine Learning Methods for Quality Prediction of Drilled and Reamed Bores Based on NC-Internal Signals
Procedia CIRP of the 9th CIRP Conference on High Performance Cutting (HPC), Volume 101, pages 77-80, ISSN 2212-8271, Sheffield (UK), May 24-26 May 2021, DOI: 10.1016/j.procir.2020.09.190, 2021

Fang, S.
Wear Assessment of Cemented Carbide Tools (WC-Co) with Defined Cutting Edges under Grinding-like Service Conditions
Journal Wear, DOI: 10.1016/j.wear.2021.203744, 2021

Fang, S.; Ernst, A.; Llanes, L.; Bähre, D.
Laser Surface Texturing of PECM Tools and the Validation
20th CIRP Conference on Electro Physical and Chemical Machining (ISEM), Procedia CIRP, Volume 95, pages 891-896, ISSN 2212-8271, Zurich (Switzerland), January 19-21, 2021, DOI: 10.1016/j.procir.2020.01.183

2020


Fang, S.; Klein, S.; Bähre, D.; Llanes, L.
Performance of laser surface textured cemented carbide tools during abrasive machining: Coating effects, surface integrity assessment and wear characterization
CIRP Journal of Manufacturing Science and Technology, Volume 31, pages 130-139, DOI: 10.1016/j.cirpj.2020.10.006, 2020

Ghasemiansafaei, M; Güner, M.; Schäfer, F.; Zeiner, M.; Bähre, D.
Detection of hydrogen in cathode tool during pulse electrochemical machining
Proceedings of the 16th International Symposium on Electrochemical Machining Technology, pp. 21-26, ISBN 978-3-95735-125-8, Chemnitz (Germany), November 24 to 25, 2020.

Herter, F; Ernst, A.; Bergmann, A.; Bähre, D.
Experimental study of electrochemical machining of selective laser melted Inconel 718
Proceedings of the 16th International Symposium on Electrochemical Machining Technology, pp. 71-76, ISBN 978-3-95735-125-8, Chemnitz (Germany), November 24 to 25, 2020.

Hall, T; Ernst, A.; Durneata, D.; Natter, H.; Saumer, M.; Bähre, D.
Pulse Electrochemical Machining (PECM) of microstructured functional surfaces
Proceedings of the 16th International Symposium on Electrochemical Machining Technology, pp. 139-148, ISBN 978-3-95735-125-8, Chemnitz (Germany), November 24 to 25, 2020.

Fang, S.; Bähre, D.; Llanes, L.
Assessment of wear micromechanisms on a laser textured cemented carbide tool during abrasive-like machining by FIB/FESEM
Journal Friction, Volume 9, issue 3, pages 656-664, DOI: 10.1007/s40544-020-0422-z, 2020

Klein, S.; Klein, H.; Bähre, D.
Modellierung und Simulation zur Verbesserung der Prozessdynamik beim Präzisionshonen
Jahrbuch Schleifen, Honen, Läppen und Polieren/69. Ausgabe, 2020

Fang, S.; Bähre, D.
Neuartiges Konzept von Hartmetallwerkzeugen zur Feinbearbeitung
Technical journal Werkstoffe in der Fertigung, issue 4/2020, pages 25-26, 2020

Klein, S.; Schorr, S.; Bähre, D.
Quality Prediction of Honed Bores with Machine Learning Based on Machining and Quality Data to Improve the Honing Process Control
53rd CIRP Conference on Manufacturing Systems (CMS2020); Chicago (USA); July 1 to 3, 2020, Procedia CIRP, Volume 93, pages 1322-1327, DOI: 10.1016/j.procir.2020.03.055, 2020.

Schorr, S.; Möller, M.; Heib, J.; Bähre, D.
In-process Quality Control of Drilled and Reamed Bores using NC-Internal Signals and Machine Learning
53rd CIRP Conference on Manufacturing Systems (CMS2020); Chicago (USA); July 1 to 3, 2020, Procedia CIRP, Volume 93, pages 1328-1333, DOI: 10.1016/j.procir.2020.03.020, 2020.

Oberlé, R.; Schorr, S.; Yi, L.; Glatt, M.; Bähre, D.; Aurich, J.
A Use Case to Implement Machine Learning for Life Time Prediction of Manufacturing Tools
53rd CIRP Conference on Manufacturing Systems (CMS2020); Chicago (USA); July 1 to 3, 2020, Procedia CIRP, Volume 93, pages 1484-1489, DOI: 10.1016/j.procir.2020.03.020, 2020.

Schorr, S.; Möller, M; Heib, J.; Bähre, D.
Quality Prediction of Drilled and Reamed Bores Based on Torque Measurements and the Machine Learning Method of Random Forest
Procedia Manufacturing, 48th SME North American Manufacturing Research Conference (NAMRC), pages 894-901, ISSN 2351-9789, DOI: 10.1016/j.promfg.2020.05.127, 2020.

Fang, S.; Müller, D.W.; Rauch, C.; Cao, Y.; Mücklich, F.; lanes, L.; Bähre, D.
Fabrication of Interference Textures on Cemented Carbides Using Nanosecond and Femtosecond Laser Pulses
Procedia CIRP, Volume 87, pages 216-221, ISSN 2212-8271, DOI: 10.1016/j.procir.2020.02.063, 2020

Fang, S.
Morphological study of a cubic boron nitride (CBN) cutting tool and characterization of its wear scenarios in abrasive machining process
Ceramics International, ISSN 0272-8842, DOI: 10.1016/j.ceramint.2020.04.302, 2020

line

2019


Fang, S.; Llanes, L.
Microstructural characterization of cemented carbides by 3D volume reconstruction
Materials Characterization, ISSN 1044-5803, DOI: 10.1016/j.matchar.2019.110061, 2019

Schuh G.; Scholz P.; Schorr S.; Harman D.; Möller M.; Heib J.; Bähre D.
Prediction of Workpiece Quality: An Application of Machine Learning in Manufacturing Industry
6th International Conference on Computer Science, Engineering and Information Technology (CSEIT-2019), Volume Editors: Natarajan Meghanathan, Dhinaharan Nagamalai (Eds), ISBN: 978-1-925953-09-1, November 23 to 24, 2019, Zurich, Switzerland

Bähre, D.; Ernst, A. (Editors)
International Symposium on Electrochemical Machining Technology INSECT 2019 Proceedings
Saarbrücken (Germany), November 14 to 15, 2019, ISBN 978-3-00-064086-5, 2019.

Ernst, A.; Klein, S.; Hall, T.; Avila, L.; Bähre, D.
Electrochemical dressing of hard tools for abrasive precision machining
Proceedings of the 15th International Symposium on Electrochemical Machining Technology, pp. 96-103, ISBN 978-3-00-064086-5, Saarbrücken (Germany), November 14 to 15, 2019.

Ernst, A.; Hall, T.; Frank, A.; Derouach, H.; Bähre, D.
Microstructuring of Inconel 718 via Pulse Electrochemical Machining
Proceedings of the 15th International Symposium on Electrochemical Machining Technology, pp. 116-123, ISBN 978-3-00-064086-5, Saarbrücken (Germany), November 14 to 15, 2019.

Mankeekar, T.; Bähre, D.; Durneata, D.; Engelmann, E.; Hall, T.; Natter, H.; Saumer, M.
Fabrication and Application of Micro Structured Tools for Pulsed Electrochemical Machining
Proceedings of the 15th International Symposium on Electrochemical Machining Technology, pp. 180-184, ISBN 978-3-00-064086-5, Saarbrücken (Germany), November 14 to 15, 2019.

Schorr, S.; Möller, M; Heib, J.; Fang, S.; Bähre, D.
Quality Prediction of Reamed Bores Based on Process Data and Machine Learning Algorithm: A Contribution to a More Sustainable Manufacturing
17th Global Conference on Sustainable Manufacturing (GCSM); Shanghai (China); October 9 to 11, 2019.

Fang, S.; Klein, S.; Hsu, C.-J.; Llanes, L.; Gachot, C.; Baehre, D.
Fabrication and tribological performance of a laser-textured hardmetal guiding stone for honing processes
International Journal of Refractory Metals and Hard Materials, Volume 84, ISSN 0263-4368, DOI: 10.1016/j.ijrmhm.2019.105034, 2019

Fang, S.; Klein, S.
Surface structuring of polycrystalline diamond (PCD) using ultrashort pulse laser and the study of force conditions
International Journal of Refractory Metals and Hard Materials, Volume 84, ISSN 0263-4368, DOI: 10.1016/j.ijrmhm.2019.105036, 2019

Lyubenova, N.; Bähre, D.; Krupp, L.; Fouquet, J.; Cronier, T.; Patel, J.; Hoffmann, J.E.
Impact of the Process Parameters, the Measurement Conditions and the Pre-Machining on the Residual Stress State of Deep Rolled Specimens
Journal of Manufacturing and Materials Processing, 3 (3), 56, Doi: 10.3390/jmmp3030056, 2019.

Klein, S.; Greulich, M.; Bähre, D.
Analysis of the Interaction of the Honing Tool in Relation to the Gimbal by a Simulation in Precision Honing
17th CIRP Conference on Modelling of Machining Operations (CMMO 2019); Sheffield (UK); Procedia CIRP 82, pp. 190 - 195, Doi: 10.1016/j.procir.2019.04.072, June 13 to 14, 2019.

Fang, S.; García Marro, F.; Salán, N.; Cruz, M.; Colominas, C.; Baehre, D.; Llanes, L.
Surface integrity assessment of laser treated and subsequently coated cemented carbides
International Journal of Refractory Metals and Hard Materials, Volume 83, ISSN 0263-4368, DOI: 10.1016/j.ijrmhm.2019.104982, 2019

Fang, S.; Pérez, V.; Salán, N.; Baehre, D.; Llanes, L.
Surface Patterning of Cemented Carbides by Means of Nanosecond Laser
Journal Materials and Manufacturing Processes, DOI: 10.1080/10426914.2019.1628268, 2019

Klein, S.; Klein, H.; Bähre, D.
Analyse der Prozessdynamik beim Präzisionshonen von Bohrungen
Jahrbuch Schleifen, Honen, Läppen und Polieren/68. Ausgabe, 2019

line

2018


Hall, T.; Ernst, A.; Jene, T.; Zäh, R.-K.; Bähre, D.
Implementation of a PECM application for the processing of functional surfaces
Proceedings of the 14th International Symposium on Electrochemical Machining Technology, pp. 213-219, ISBN 978-3-86359-667-5, Aachen (Germany), November 27 to 28, 2018.

Herter, F.; Hall, T.; Bergmann, A.; Bähre, D.
Experimental comparison of electrochemical machining of selective laser melted and conventionally produced specimens
Proceedings of the 14th International Symposium on Electrochemical Machining Technology, pp. 17-24, ISBN 978-3-86359-667-5, Aachen (Germany), November 27 to 28, 2018.

Ernst, A.; Hall, T.; Daneshi, A.; Azarhoushang, B.; Bähre, D.
Effects of Electrochemical Postprocessing on Ground Ti-6Al-4V Parts
Proceedings of the 14th International Symposium on Electrochemical Machining Technology, pp. 3-10, ISBN 978-3-86359-667-5, Aachen (Germany), November 27 to 28, 2018.

Kaspar, J.; Bechtel, S.; Häfele, T.; Herter, F.; Schneberger, J.; Bähre, D.; Griebsch, J.; Herrmann, H.-G.; Vielhaber, M.
Integrated Additive Product Development for Multi-Material Parts
16th Global Conference on Sustainable Manufacturing (GCSM); Lexington (Kentucky, USA); Doi: 10.1016/j.promfg.2019.04.002, October 2 to 4, 2018.

Fang, S.; Marro, F.; Salan, N.; Cruz, M.; Colomina, C.; Llanes, L.; Baehre, D.
Surface Integrity Assessment of Coated Cemented Carbides Following Laser Treatment
2018 World Congress on Powder Metallurgy (WORLDPM2018), Beijing (China),September 16 to 20, 2018.

Otaghvar, M.H.; Hahn, B.; Werner, H.; Omiditabrizi, H.; Bähre, D.
Optimization of centerless through-feed grinding using 3D kinematic simulation
12th CIRP Conference on Intelligent Computation in Manufacturing Engineering (ICME 2018); Naples (Italy); Procedia CIRP 79, pp. 308 - 312, Doi: 10.1016/j.procir.2019.02.072, July 18 to 20, 2018.

Klein, S.; Greulich, M.; Bähre, D.
Analysis of the Dynamics of a Honing Gimbal by using Twi Friction Models in Long Stroke Honing
8th CIRP Conference on High Performance Cutting (HPC 2018); Budapest (Ungarn); Procedia CIRP 77, pp. 328 - 331, Doi: 10.1016/j.procir.2018.09.027, June 25 to 27, 2018.

Otaghvar, M.H.; Hahn, B.; Werner, H.; Omiditabrizi, H.; Bähre, D.
A novel approach to roundness generation analysis in centerless through-feed grinding in consider of decisive parameters of grinding gap by use of 3D kinematic simulation
8th CIRP Conference on High Performance Cutting (HPC 2018); Budapest (Ungarn); Procedia CIRP 77, pp. 247 - 250, Doi: 10.1016/j.procir.2018.09.007, June 25 to 27, 2018.

Fang, S.; Soldera, F.; Rosenkranz, A.; Herrmann, T.; Bähre, D.; Llanes, L.; Mücklich, F.
Microstructural and Metallurgical Assessment of the Laser-Patterned Cemented Tungsten Carbide (WC-CoNi)
46th Proceedings of the North American Manufacturing Research (NAMRC 46), College Station (USA), pages 198-204, Doi: 10.1016/j.promfg.2018.07.027, June 18 to 22, 2018.

Klein, S.; Bähre, D.
Analysis of the Movements in Relation to the Degrees of Freedom in Precision Honing
46th Proceedings of the North American Manufacturing Research (NAMRC 46), College Station (USA), pages 286-293, Doi: 10.1016/j.promfg.2018.07.037, June 18 to 22, 2018.

Ernst, A.; Heib T.; Hall T.; Schmidt G.; Baehre, D.
Simulation of the Tool Shape Design for the Electrochemical Machining of Jet Engine Vanes
Proceedings of the 19th CIRP Conference on Electro Physical and Chemical Machining (ISEM), pp. 762-767, ISSN 2212-8271, Bilbao (Spain), April 23-27, 2018, DOI: 10.1016/j.procir.2017.12.134, 2018

Fang, S.; Lima R.; Sandoval D.; Baehre, D.; Llanes, L.
Ablation Investigation of Cemented Carbides Using Short-Pulse Laser Beams
Proceedings of the 19th CIRP Conference on Electro Physical and Chemical Machining (ISEM), pp. 172-177, ISSN 2212-8271, Bilbao (Spain), April 23-27, 2018, DOI: 10.1016/j.procir.2017.12.042, 2018

Fang, S.; Llanes, L.; Baehre, D.
Laser surface texturing of a WC-CoNi cemented carbide grade: Surface topography design for honing application
Journal Tribology International (2018), DOI: 10.1016/j.triboint.2018.02.018, 2018.

Fang, S.; Hsu, C.-J.; Klein, S.; Llanes, L.; Baehre, D.; Mücklich, F.
Influence of Laser Pulse Number on the Ablation of Cemented Tungsten Carbides (WC-CoNi) with Different Grain Size
Journal Lubricants 2018, 6(1), 11, DOI: 10.3390/lubricants6010011, 2018.

line

2017


Ernst, A.; Heib, T.; Hall, T.; Schmidt, G.; Bähre, D.
Simulation-based tool development for the electrochemical machining of jet engine vanes
Proceedings of the 13th International Symposium on Electrochemical Machining Technology, pp. 23-30, ISBN 978-3-8396-1261-3, Dresden (Germany), November 30 to December 1, 2017.

Lyubenova N.; Bähre D.
Investigation of the Surface Residual Stresses in Single and Multiple Trace Deep Rolling on Flat AISI 4140 Specimens
Conference Proceedings of the 13th International Conference on Shot Peening, Montreal (Canada), September 18 to 21, 2017.

Fang, S.; Hsu, C.-J.; Klein, S.; Llanes, L.; Bähre, D.; Mücklich, F.
Machining influence on cemented tungsten carbide (WC-CoNi) by ultrashort pulse laser
6th World Tribology Congress (WTC 2017), Beijing (China), September 17 to 22, 2017.

Fang, S.; Llanes, L.; Bähre, D.; Mücklich, F.
3D characterization of cubic boron nitride (CBN) composites used as tool material for high precision abrasive machining processes
In Ceramics International, Volume 43, Issue 17, 2017, Pages 14693-14700, ISSN 0272-8842, DOI: 10.1016/j.ceramint.2017.07.198, 2017.

Fang, S.; Llanes, L.; Baehre, D.
Wear Characterization of Cemented Carbides (WC–CoNi) Processed by Laser Surface Texturing under Abrasive Machining Conditions
Journal Lubricants 2017, 5(3), 20, DOI: 10.3390/lubricants5030020, 2017.

Klein, S.; Fang, S.; Bähre, D.
Analysis of Different Surface Structures of Hard Metal Guiding Stones in the Honing Process
45rd Proceedings of the North American Manufacturing Research (NAMRC 45), Los Angeles (USA), pages 265-275, Doi: 10.1016/j.promfg.2017.07.055, June 4 to 8, 2017.

Fang, S.; Llanes, L.; Klein, S.; Gachot, C.; Rosenkranz, A.; Bähre, D.; Mücklich, F.
Frictional Performance Assessment of Cemented Carbide Surfaces Textured by Laser
IOP Conference Series: Materials Science and Engineering. 258 (2017) - International materials research meeting in the greater region - Current Trends in the Characterisation of Materials and Surface Modification, Saarbrücken (Germany), Doi: 10.1088/1757-899X/258/1/012006, April 6 to 7, 2017.

Lyubenova N.; Bähre D.
The Impact of the Material Modeling on the Calculated Residual Stresses Induced by Deep Rolling
International materials research meeting in the greater region - Current Trends in the Characterisation of Materials and Surface Modification, Saarbrücken (Germany), April 6 to 7, 2017.

line

2016


Fang, S.; Llanes, L.; Engstler, M.; Baehre, D.; Soldera, F.; Muecklich, F.
Surface Topography Quantification of Super Hard Abrasive Tools by Laser Scanning Microscopy
Materials Performance and Characterization, Vol. 5, pp. 796-815, ISSN 2165-3992, DOI: 10.1520/MPC20160008, 2016.

Ernst, A.; Heib, T.; Bähre, D.
Experimental Study On Fundamental PECM Characteristic Of Gamma Titanium Aluminide With Sodium Chloride Electrolyte
Proceedings of the 12th International Symposium on Electrochemical Machining Technology, pp. 85-91, ISBN 978-9461-97-461-7, Mechelen (Belgie), November 17 to 18, 2016.

Fang, S.; Gachot, C.; Klein, S.; Rosenkranz, A.; Bähre, D.; Llanes, L.; Mücklich, F.
Improving the Tribological Performance of WC-Co Hard Metal Surfaces by Laser Surface Texturing
Materials Science and Engineering Congress (MSE) 2016, Darmstadt (Germany), September 27 to 29, 2016.

Lyubenova N.; Jacquemin M.; Bähre D.
Influence of the Pre-Stressing on the Residual Stresses Induced by Deep Rolling
Residual Stresses 2016: ICRS-10, Materials Research Forum LLC, Sydney (Australia), Materials Research Proceedings 2 (2016), pages 253-258, DOI: 10.21741/9781945291173-43, July 3 to 7, 2016.

Lyubenova N.; Pineault J.; Brünnet H.; Bähre D.
X-Ray Diffraction Measurements and Investigation of the Stress Relaxation in Autofrettaged AISI 4140 Steel Thick Walled Cylinders
Residual Stresses 2016: ICRS-10, Materials Research Forum LLC, Sydney (Australia), Materials Research Proceedings 2 (2016), pages 335-340, DOI: 10.21741/9781945291173-57, July 3 to 7, 2016.

Kaspar, J., Bähre, D., Vielhaber, M.
Material Selection Based on a Product and Production Engineering Integration Framework
26th CIRP Design Conference – Creative Design Products and Production Systems, Procedia CIRP, Stockholm (Sweden), Vol. 50 (2016), pages 2-7, DOI: 10.1016/j.procir.2016.04.181, June 15 to 17, 2016.

Trapp, K.; Herter, F.; Bähre, D.
Magnetic Property Changes by Machining Ferromagnetic Materials
Proceedings of the 7th High Performance Cutting Conference (7th HPC 2016), Chemnitz (Germany), Procedia CIRP 46 (2016) pages 250-253, DOI: 10.1016/j.procir.2016.04.006, May 31 to June 2, 2016.

Klein, S.; Forsch, K.; Maier, R.; Brandstetter, J.; Klein, H.; Bähre, D.
Untersuchung des kinematischen Verhaltens beim Präzisionshonen von Bohrungen
Jahrbuch Schleifen, Honen, Läppen und Polieren/67. Ausgabe, 2016

Bähre, D.; Ernst, A.; Weißhaar, K.; Natter H.; Stolpe, M.; Busch, R.
Electrochemical Dissolution Behavior of Titanium and Titanium-based Alloys in Different Electrolytes
Proceedings of the 18th CIRP Conference on Electro Physical and Chemical Machining (ISEM), Tokyo, (Japan), Procedia CIRP Vol. 42, pp. 137-142, DOI: 10.1016/j.procir.2016.02.208, 2016.

Fang, S.; Herrmann, T.; Rosenkranz, A.; Gachot, C.; Marro, F.G.; Mücklich, F.; Llanes, L.; Bähre, D.
Tribological Performance of Laser Patterned Cemented Tungsten Carbide Parts
Proceedings of the 18th CIRP Conference on Electro Physical and Chemical Machining (ISEM), Tokyo, (Japan), Procedia CIRP Vol. 42, pp. 439-443, DOI: 10.1016/j.procir.2016.02.208, 2016.

Fang, S.; Rosenkranz, A.; Marro, F.G.; Gachot, C.; Llanes, L.; Bähre, D.; Mücklich, F.
Surface Modification of Cemented Tungsten Carbide (WC-Co) by Ultra-Short Pulse Laser Processing and its Tribological Properties
7th International Conference on Tribology in Manufacturing Processes, Phuket (Thailand), February 28 to March 2, 2016.

line

2015


Lyubenova, N.; Bähre, D.
Finite Element Modelling and Investigation of the Process Parameters in Deep Rolling of AISI 4140 Steel
Journal of Materials Science and Engineering B, Volume 5, Number 8 (2015), Pages 277-287, DOI: 10.17265/2161-6221/2015.7-8.004, 2015.

Moos U.; Bähre, D.
Modelling of tool behaviour for long stroke honing of bores
Production Engineering Research and Development, Volume 9, Issue 5 (2015), Page 601-612, DOI: 10.1007/s11740-015-0638-3, 2015.

Bähre, D.; Swat, M.; Trapp, K.; Vielhaber, M.
Supporting manufacturing technology definition through multi-level resource consumption analysis
Proceedings of the 13th Global Conference on Sustainable Manufacturing, GCSM 2015, p. 42, Ho Chi Minh City / Binh Duong (Vietnam), Procedia CIRP 40 (2016), pages 378-383, doi:10.1016/j.procir.2016.01.071, September 16-18, 2015.

Fang, S.; Bähre, D.; Llanes, L.
Surface Modification of Cemented Tungsten Carbide (WC-Co) by Femto-second Laser and its Tribological Properties
4rd DocMASE Summer School on Mechanical Properties of Advanced Engineering Materials, Barcelona (Spain), September 7-12, 2015.

Schmitt, C.; Klein, S.; Bähre, D.
An Introduction to the vibration analysis for the precision honing of bores
43rd Proceedings of the North American Manufacturing Research (NAMRC 43), Charlotte (USA), Pages 637-643, doi: 10.1016/j.promfg.2015.09.056, June 8-12, 2015.

Trapp, K.; Käfer, L.; Bähre, D.
Effects of Machining Ferromagnetic Materials on Magnetic Property Changes
43rd Proceedings of the North American Manufacturing Research (NAMRC 43), Charlotte (USA), Pages 721-727, doi: 10.1016/j.promfg.2015.09.030, June 8-12, 2015.

Lyubenova, N.; Thuillier, L.; Bähre, D.
Modelling of the input parameters and investigations of the surface residual stresses and –deformations in Deep Rolling
29th International Conference of Surface Modification Technology (SMT 29), Copenhagen (Denmark), June 10-12, 2015.

Ernst, A.; Stolpe, M.; Bähre, D.
Investigations on Pulse Electrochemical Machining characteristics of titanium aluminide intermetallics
8th International EEIGM/AMASE Conference on Advanced Materials Research, Valencia, (Spain), June, 2015.

Fang, S.; Marro, F.; Gachot, C.; Llanes, L.; Bähre, D.
Cemented Carbide Tool Surface Modification and its Mechanical Contact Response Investigation
8th International EEIGM/AMASE Conference on Advanced Materials Research, Valencia, (Spain), June, 2015.

Moos, U.; Bähre, D.
Analysis of Process Forces for the Precision Honing of Small Bores
15th Conference On Modelling Of Machining Operations (CMMO 15), Karlsruhe (Germany), June 11-12, Procedia CIRP 31C, pp. 381-386, DOI: 10.1016/j.procir.2015.03.066, 2015.

Lyubenova N.; Bähre D.
Finite Element modeling and investigation of the process parameters in Deep Rolling of a plane geometry
12th International Conference on the Mechanical Behavior of Materials, Karlsruhe (Germany), May 10-14, 2015.

Steuer, P.; Weber, O.; Bähre, D.
Structuring of wear-affected copper electrodes for electrical discharge machining using Pulse Electrochemical Machining
Int. Journal of Refractory Metals and Hard Materials 52, pp 85–89, DOI: 10.1016/j.ijrmhm.2015.05.003, 2015.

Weißhaar, K.; Weinmann, M.; Jung, A.; Weber, O.; Natter, H.
Replication of microstructured tools for electrochemical machining applications
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-015-7367-9, 2015.

Zapp N.; Weber O.; Natter H.
Corrosion- and Electrochemical Dissolution Behavior of Cast Iron Measured with Different Electrochemical Cell Types
Int. J. Electrochem. Sci., 10 (2015) 5434 – 5455, 2015.

Steuer, P.; Rebschläger, A.; Ernst, A.; Bähre, D.
Process design in Pulse Electrochemical Machining based on material specific data - 1.4301 and electrolytic copper as an example
Key Engineering Materials , Selected, peer-reviewed papers from the 18th International ESAFORM Conference on Material Forming (ESAFORM 2015), April 15-17, 2015, Graz, Austria, 651-653: 732-737, 2015.

Stock, T.; Bietz, T.; Alva, D.; Swat, M.; Seliger, G.; Bähre, D.
Design and Control of Manufacturing Systems for Enabling Energy-Efficiency and -Flexibility
International Conference on Sustainable Design and Manufacturing 2015, Seville, 2015.

Swat, M.; Rebschläger, A.; Trapp, K.; Stock, T.; Seliger, G.; Bähre, D.
Investigating the energy consumption of the PECM process for consideration in the selection of manufacturing process chains
Proceedings of the 22nd CIRP International Conference on Life Cycle Engineering (LCE 2015), Sydney (Australia), April 7-9, Procedia CIRP (2015), Vol. 29, pp. 585-590, 2015.

Weinmann, M.; Stolpe, M.; Weber, O.; Busch, R.; Natter, H.
Electrochemical dissolution behaviour of Ti90Al6V4 and Ti60Al40 used for ECM applications
Journal of Solid State Electrochemistry, Vol. 19, Issue 2, pp 485-495, 2015.

Weber, O.; Natter, H.; Bähre, D.
Pulse electrochemical machining of cast iron: a layer-based approach for modeling the steady-state dissolution current
Journal of Solid State Electrochemistry, Vol. 19, Issue 5, pp. 1265-1276, 2015.

Weber, O.; Weinmann, M.; Natter, H.; Bähre, D.
Electrochemical dissolution of cast iron in NaNO3-electrolyte
Journal of Applied Electrochemistry, Vol. 45, Issue 6, pp. 591-609, 2015.

line

2014


Stoffels, P.; Bähre, D.; Frey, G.; Vielhaber, M.
Energy Efficiency Engineering – Towards an Integrated Method Framework for Energy-oriented Product and Production Development
Proceedings of the 2nd International Congress on Energy Efficiency and Energy Related Materials ENEFM, Oludeniz, Turkey, Oct. 2014.

Schmitt, C.; Moos, U.; Bähre, D.
Ansatz zur Modellbildung beim Präzisionshonen von Bohrungen
3. International Chemnitz Manufacturing Colloquium ICMC, 2014.

Bähre, D.; Rebschläger, A. (Editors)
International Symposium on Electrochemical Machining Technology INSECT 2014 Proceedings
Saarbrücken (Germany), November 13 to 14, 2014, Verlag Wissenschaftliche Scripten, ISBN 978-3-95735-010-7, 2014.

Steuer, P.; Ernst, A.; Bähre, D.
Removal efficiency and gap evolution of electrolytic copper in Pulse Electrochemical Machining
Proceedings of the 10th International Symposium on Electrochemical Machining Technology, pp. 157-165, ISBN 978-3-95735-010-7, Saarbrücken (Germany), November 13 to 14, 2014.

Natter, H.; Weinmann, M.; Munief, W.; Weber, O.; Bähre, D.; Saumer, M.
PhoGaTool: A new Process Chain for Manufacturing of ECM Tools
Proceedings of the 10th International Symposium on Electrochemical Machining Technology, pp. 147-157, ISBN 978-3-95735-010-7, Saarbrücken (Germany), November 13 to 14, 2014.

Rebschläger, A.; Fink, K.U.; Heib, T.; Bähre, D.
Geometric shaping analysis based on PECM video process observations
Proceedings of the 10th International Symposium on Electrochemical Machining Technology, pp. 37-44, ISBN 978-3-95735-010-7, Saarbrücken (Germany), November 13 to 14, 2014.

Bähre, D.; Fang, S.; Gliche, J.; Trapp, K.
Investigation of Lubricationeffects in abrasive Processes by Force Measurements
International Conference on Material Engineering and Application, Hangzhou (China), October 18-19, 2014.

Bähre, D.; Fang, S.; Gliche, J.; Trapp, K.
Set-up of a Test Bench for the Investigation of Single Parameter Effects in Abrasive Processes by Force Measurements
Advanced Materials Research Vol. 1052, ©(2014)Trans Tech Publications, (Switzerland), pp. 441-446, 2014.

Fang, S.; Bähre, D.; Llanes, L.
Impact of the guide stone surface structure in the honing process
3rd DocMASE Summer School on Thin Films Science and Surface Engineering, Nancy (France), August 24-29, 2014.

Brünnet, H.; Hofmann; M.;Lyubenova, N.; Bähre, D.
Effect of different manufacturing process steps on the final residual stress depth profile along the process chain of autofrettaged thickwalled-cylinders
Advanced Materials Research, Vol. 996, pp. 676-681, 2014.

Steuer, P.; Weber, O.; Bähre, D.
Introducing a PECM-EDM Process Chain for the Reproducible Structuring of Hard Metal
ICSHM10 Extended Abstracts, pp. 157-158, 10th International Conference on the Science of Hard Materials, Cancún, (México), 2014.

Steuer, P.; Rebschläger, A.; Weber, O.; Bähre, D.
The Heat-affected Zone in EDM and its Influence on a Following PECM Process
Procedia CIRP, Volume 13, pp. 276-281, 2014.

Rebschläger, A.; Kollmannsperger, R.; Bähre, D.
Video based Process Observations of the Pulse Electrochemical Machining Process at High Current Densities and Small Gaps
Procedia CIRP, pp. 418-423, DOI: 10.1016/j.procir.2014.03.105, 2014.

Swat, M.; Brünnet, H.; Lyubenova, N.; Schmitt, J.; Diebels, S.; Bähre, D.
Improved Process Control and Model of Axial Forces of One-way Abrasive Flow Machining
Procedia CIRP, pp. 19-24, DOI: 10.1016/j.procir.2014.03.106, 2014.

Brünnet, H.; Lyubenova, N.; Müller, M.; Hoffmann, J.E.; Bähre, D.
Verification and Application of a New 3D Finite Element Approach to Model the Residual Stress Depth Profile after Autofrettage and Consecutive Reaming
Procedia CIRP, Volume 13, pp. 72-77, 2014.

Weinmann, M.; Weber, O.; Bähre, D.; Munief, W.; Saumer, M.; Natter, H.
Photolithography - Electroforming - Pulse Electrochemical Machining: An Innovative Process Chain for the High Precision and Reproducible Manufacturing of Complex Microstructures
Int. J. Electrochem. Sci., 9, pp. 3917-3927, 2014.

Brünnet, H.; Bähre, D.
Full Exploitation of Lightweight Design Potentials by Generating Pronounced Compressive Residual Stress Fields with Hydraulic Autofrettage
Advanced Materials Research Volume 907, WGP Congress 2012 - Progress in Production Engineering, pp. 17-27, 2014.

Brünnet, H.; Bähre, D.; Rickert, T.; Dapprich, D.
Modeling and Measurement of Residual Stresses Along the Process Chain of Autofrettaged Components by Using FEA and Hole-Drilling Method with ESPI
Proceedings of the 9th International Conference on Residual Stresses, Materials Science Forum 768-769, pp. 79-86, 2014.

Swat, M.; Brünnet, H.; Bähre, D.
Selecting manufacturing process chains in the early stage of the product engineering process with focus on energy consumption
Technology and Manufacturing Process Selection: The Product Life Cycle Perspective, Springer, ISBN 978-1-4471-5543-0, 2014.

line

2013


Schmitt, C.; Bähre, D.; Moos, U.;Forsch, K.; Klein, H.; Regler, R.; Maier, R.
Kraftregelung zur Erhöhung der Prozessstabilität und Genauigkeit beim Bohrungshonen
Jahrbuch Schleifen, Honen, Läppen und Polieren/66. Ausgabe, 2013.

Schmitt, C.; Moos, U.; Bähre, D.
Comparison of Different Approaches to Force Controlled Precision Honing of Bores
Journal of Mechanics Engineering and Automation Volume 3, Number 12, pp. 764-771, 2013.

Weber, O.; Bähre, D.
Investigation on the Influence of the Microstructure by Pulse Electrochemical Machining of Cast Iron
Proceedings of the 9th International Symposium on Electrochemical Machining Technology, Editors: A. Schubert, M. Hackert-Oschätzchen, ISBN 978-3-942267-95-3, 2013.

Rebschläger, A.; Weber, O.; Heitkamp, B.
Benefits and Drawbacks Using Plastic Materials Produced by Additive Manufacturing Technologies in the Electrochemical Environment
Proceedings of the 9th International Symposium on Electrochemical Machining Technology, Editors: A. Schubert, M. Hackert-Oschätzchen, ISBN 978-3-942267-95-3, 2013.

Swat, M.; Rebschläger, A.; Bähre, D.
Investigation of the energy consumption for the pulse electrochemical machining (PECM) process
Proceedings of the 9th International Symposium on Electrochemical Machining Technology, Editors: A. Schubert, M. Hackert-Oschätzchen, ISBN 978-3-942267-95-3, 2013.

Weber, O.; Rebschläger, A; Steuer, P.; Bähre, D.
Modeling of the Material/Electrolyte Interface and the Electrical Current Generated during the Pulse Electrochemical Machining of Grey Cast Iron
Proceedings of the European COMSOL Conference, Rotterdam, (Netherlands), 2013.

Weinmann, M.; Weber, O.; Bähre, D.; Natter, H.
Corrosion-investigations on Titanium-Aluminium alloys for ECM applications
International Conference on Advanced Manufacturing for Multifunctional Miniaturised Devices, Zweibrücken, (Germany), 2013.

Weinmann, M.; Weber, O.; Bähre, D.; Natter, H.
Investigation on the electrochemical corrosion behavior of Titanium-Aluminium materials
Wissenschaftsforum CHEMIE, Darmstadt, (Germany), 2013.

Bähre, D. (editor)
Recent Advances in Abrasives Research
Nova Publishers, ISBN 978-1-62808-589-1, 2013.

Brünnet, H.; Swat, M.
One-Way Abrasive Flow Machining: Basic Parameter Influences and in Process Axial Force Measurement
In: Bähre, D. (editor): Recent Advances in Abrasives Research, Editor: Dirk Bähre, Nova Publishers, pp. 213-247, ISBN 978-1-62808-589-1, 2013.

Schmitt, C.
Influences on the Precision Honing of Small Bores for Unhardened Steel
In: Bähre, D. (editor): Recent Advances in Abrasives Research, Editor: Dirk Bähre, Nova Publishers, pp. 267-284, ISBN 978-1-62808-589-1, 2013.

Swat, M.; Stock, T.; Bähre, D.; Seliger, G.
Monitoring production systems for energy-aware planning and design of process chains
Proceedings of the 11th Global Conference on Sustainable Manufacturing, GCSM 2013, pp. 649-654, Berlin, (Germany), September 23-25, 2013.

Fang, S.; Bähre, D.; Llanes, L.
Lubrication Oil Behaviour Characterisation in Honing Process
2nd DocMASE Summer School on Multiscale Modelling in Materials Science and Engineering, Linköping (Sweden), August 26-30, 2013.

Brünnet, H.; Bähre, D.
Modeling of the Influence of Sample Preparation Sequences When Measuring Selectively Induced Residual Stress Depth Profiles
SME Journal of Manufacturing Processes 15/4, pp. 572-579, http://dx.doi.org/10.1016/j.jmapro.2013.06.009, 2013.

Schmitt, C.; Bähre, D.
An Approach to the Calculation of Process Forces during the Precision Honing of Small Bores
Procedia CIRP, Volume 7, pp. 282-287, 46th CIRP Conference on Manufacturing Systems CMS 2013, Setubal, (Portugal), May 29-31, 2013.

Brünnet, H.; Bähre, D.
Modeling of the Influence of Sample Preparation Sequences When Measuring Selectively Induced
Residual Stress Depth Profiles

Proceedings of NAMRI/SME 41, in press, 2013.

Brünnet, H.; Bähre, D.
Simulation of Beneficial Compressive Residual Stress Fields as Design Tool in Manufacturing
Internally Pressurized Parts

Proceedings of Simulia Community Conference 2013, Vienna, (Austria), 2013.

Bähre, D.; Weber, O.; Rebschläger, A.
Investigation on Pulse Electrochemical Machining Characteristics of Lamellar Cast Iron using
a Response Surface Methodology-based Approach

Proceedings of the 17th CIRP Conference on Electro Physical and Chemical Machining (ISEM), Leuven, (Belgium), accepted for publication, 2013.

Bähre, D.; Rebschläger, A.; Weber, O.; Steuer, P.
Reproducible, fast and adjustable surface roughening of stainless steel using Pulse Electrochemical Machining
Proceedings of the 17th CIRP Conference on Electro Physical and Chemical Machining (ISEM), Leuven, (Belgium), accepted for publication, 2013.

Bähre, D.; Steuer, P.; Swat, M.; Trapp, K.
Flexible Planning Method for Manufacturing Resources based on Process-graphs
Proceedings of the 5th International Conference on Competitive Manufacturing (COMA'13), pp. 385-390, Stellenbosch, (South Africa), 2013.

Bähre, D.; Weber, O.; Rebschläger, A.; Steuer, P.
Study of Pulse Electrochemical Machining of nickel-cobalt ferrous alloy
Proceedings of the 5th International Conference on Competitive Manufacturing (COMA&'13), pp. 119-124, Stellenbosch, (South Africa), 2013.

Weber, O.; Bähre, D.; Rebschläger, A.
Study of Pulse Electrochemical Machining characteristics of spheroidal cast iron using sodium nitrate electrolyte
Proceedings of the 5th International Conference on Competitive Manufacturing (COMA'13), pp. 125-130, Stellenbosch, (South Africa), 2013

line

2012


Wewiór, J.; Swat, M.; Seliger, G.; Bähre, D.
Planning energy efficiency in manufacturing process chains - an innovative approach for an Industrial Product-Service System
Proceedings of the 4th CIRP International Conference on Industrial Product-Service Systems (IPS2),
pp. 197-202, Tokyo, (Japan), November 8-9, 2012.

Bähre, D.; Schmitt, C.; Moos, U.
Comparison of Different Approaches to Force Controlled Precision Honing of Bores
Proceedings of NAMRI/SME, Volume 40,University of Notre Dame, Indiana, (USA), June 4-8, 2012.

Weber, O.; Natter, H.; Rebschläger, A.; Bähre, D.
Analytical characterization of the dissolution behavior of cast iron by electrochemical methods
Proceedings of the 8th International Symposium on Electrochemical Machining Technology INSECT 2012, Institute of Advanced Manufacturing Technology (IOS), Krakow, (Poland), Editor: Maria Zybura-Skrabalak, ISBN 978-83-931339-5-6, 2012.

Rebschläger, A.; Weber, O.; Bähre, D.
In-situ process measurements for industrial size Pulse Electrochemical Machining
Proceedings of the 8th International Symposium on Electrochemical Machining Technology INSECT 2012, Institute of Advanced Manufacturing Technology (IOS), Krakow, Editor: Maria Zybura-Skrabalak, ISBN 978-83-931339-5-6, 2012.

Weber, O.; Kollmannsperger, R.; Bähre, D.
Simulation of the Current Density Distribution and the Material Removal Behavior on the Graphite/Iron-Matrix Interface in Cast Iron under Pulse Electrochemical Machining Conditions
Proceedings of the European COMSOL Conference, Milan, (Italy), ISBN 978-0-9839688-7-0, 2012.

Bähre, D.; Brünnet, H.; Swat, M.
Investigation of one-way abrasive flow machining and in-process measurement of axial forces
Procedia CIRP HPC, Volume 1, pp. 436 - 441, 2012.

Bähre, D.; Schmitt, C.; Moos, U.
Analysis of the Differences between Force Control and Feed Control Strategies during the
Honing of Bores

Procedia CIRP HPC, Volume 1, pp. 394 - 398, 2012.

kasten

2011


Brünnet, H.; Yi, I.; Bähre, D.
Modeling of Residual Stresses and Shape Deviations along the Process Chain of Autofrettaged Components
Journal of Materials Science and Engineering A, Volume 1/7A, pp. 915-936, 2011.

Schmitt, C.; Bähre, D.; Forsch, K.; Klein, H.
Feinstbearbeiten hochgenauer Bohrungen durch Honen
Jahrbuch Schleifen, Honen, Läppen und Polieren/65. Ausgabe, 2011.

Bähre, D.; Brünnet, H.
Simulation of Removing Autofrettage-induced Residual Stress Loaded Layers by
Finite Element Analysis

Proceedings of the 1st CIRP Conference on Surface Integrity, Procedia Engineering, Volume 19, pp. 9-15, 2011.

Weber, O. ; Natter, H. ; Rebschläger, A. ; Bähre, D.
Surface quality and process behavior during Precise Electrochemical Machining of cast iron
Proceedings of the 7th International Symposium on Electrochemical Machining Technology, CEST Centre of Electrochemical Surface Technology, Editors: B. Mollay, M.M. Lohrengel, ISBN 978-3-00-036247-7, 2011.

Bähre, D.; Swat, M.; Steuer, P.; Trapp, K.
Energy Consumption: One Criterion for the Sustainable Design of Process Chains
Proceedings of the 9th Global Conference on Sustainable Manufacturing, (GCSM 2011), pp. 164-169, St. Petersburg, (Russia), September 28-30, 2011.

Hu, S.J.; Ko, J.; Weyand, L.; ElMaraghy, H.A.; Lien, T.K.; Koren, Y.; Bley, H.; Chryssolouris, G.; Nasr, N.; Shpitalni, M.
Assembly System Design and Operations for Product Variety
Annals of the CIRP Vol. 60/2, pp. 715-733, 2011.

Weyand, L.; Bley, H.
Mastering Volatile Demands in Car Manufacturing
44th CIRP Conference on Manufacturing Systems, Madison WI, (USA), May 31-June 3, 2011.

Wehrle, B.; Swat, M.
Vorausschauend planen - für eine energieeffiziente Produktion
Magazin Forschung, Universität des Saarlandes, 02/11, pp.23-24, 2011.

Bähre, D., Brünnet, H.
Modeling of Autofrettage-induced Deformations When Manufacturing High Pressure Parts
Proceedings of NAMRI/SME (TP11PUB24), Volume 39, Corvallis, Oregon State University, (USA), June 13-17, 2011.

Weyand, L.; Bley, H.; Swat, M.; Trapp, K.; Bähre, D.
Energy Consumption as One Possible Exclusion Criterion for the Reuse of Old Equipment in New Production Lines
Proceedings of the 18th CIRP International Conference on Life Cycle Engineering (LCE 2011), pp. 294-299, Braunschweig, (Germany), May 2-4, 2011.

Bähre, D.; Trapp, K.; Tschuncky, R.
Influences on Occurrence of Magnetism during Cutting Processes
International Journal of Automation Technology, Vol. 5, No. 3, pp. 294-299, 2011.

kasten

2010


Bähre, D.
Besser, preiswerter und umweltfreundlicher durch hochentwickelte Fertigungstechnik
Magazin Forschung 1/10, pp. 25-28, 2010.

Bähre, D.; Becker, D.; Tschuncky, R.
Analysis of Influences on Occurrence of Magnetism during Cutting Processes
Proceedings of the 4th CIRP International Conference on High Performance Cutting HPC 2010, Vol.1, pp. 19-22, Gifu, (Japan), Oct. 24-26, 2010.

Bähre, D.; Schmitt, C.
Analysis of Forces and Process Behaviour during the Honing of Bores
Proceedings of the 4th CIRP International Conference on High Performance Cutting HPC 2010, Vol. 1, pp. 23-26, Gifu, (Japan), Oct. 24-26, 2010.

Bähre, D.
Europäischer Studiengang in Werkstofftechnik mit fast 20-jähriger Tradition
In: Jahresmagazin Ingenieurwissenschaften. Lampertheim: Alpha, pp. 34-36, 2010.

Briselat, J., Brünnet, H., Friedrich, J., Klier T., Kurfer, J., Schenke, C.
Humanzentrierte Automatisierung - Automatisiertes Bearbeiten unter menschlicher Anleitung
Abschlussbericht zur WGP - Summer School 2010 Sustainable Manufacturing, Berlin, (Germany), ISBN 978-3-7983-2265-3, 2010.

Brünnet, H.; Bähre, D.
Control of Residual Stresses and Deformations along the Autofrettage Process Chain
Poster presented by H. Brünnet at MSE2010 Materials Science and Engineering Conference, Darmstadt, (Germany), Aug. 24-26, 2010.

Brünnet, H.; Bähre, D.
Elastisch plastischer Clou, PDF
Automobilkonstruktion 3/2010, pp. 30-31, Konradin Verlag, 2010.

Weyand, L.; Bley, H.; Merl, D.
Boundary Conditions for a Selective Reuse Planning in the Automotive Industry
7th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME'10), Capri, (Italy), 2010.

Weyand, L.; Bley, H.
Planning of Final Assembly Lines which are Flexible in Respect of the Output
3rd CIRP Conference on Assembly Technologies & Systems (CATS 2010), pp. 7-12, Trondheim, (Norway), 2010.

Weyand, L.; Bley, H.
Considering Worst-case Scenarios within Final Assembly Planning
43rd CIRP International Conference on Manufacturing Systems (ICMS2010), Vienna, (Austria), 2010.

Weyand, L.; Bley, H.
Automotive Final Assembly Planning and Equipment Reuse
International Conference on Competitive Manufacturing (COMA'10), pp. 343-348, Stellenbosch, (South Africa), 2010.

kasten

2009


Weyand, L.; Bley, H.; Rebschläger, A.
Variant-specific Cost Calculations in Early Stages of Automotive Final Assembly Planning
3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2009), pp. 920-929, Munich, (Germany), 2009.

Brünnet, H.; Bähre, D.
Control of Residual Stresses and Deformations in the Autofrettage Process Chain of High Pressure Components
5th International EEIGM / AMASE Conference on Advanced Materials Research, Nancy, (France), Nov. 4-5, 2009.

kasten

2008


Weyand, L.; Bley, H.
Risks and Chances in Automotive Final Assembly Planning
2nd CIRP Conference on Assembly Technologies & Systems (CATS 2008), pp. 459-468, Toronto, (Canada), 2008.

Bley, H.; Weyand, L.
Modelling Resources for Production Lines based on Process Descriptions
6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME'08), pp. 51-54, Naples, (Italy), 2008.

Weyand, L.; Bley, H.; Kaiser, J.-M.; Meißner, R.; Bär, T.
Production Oriented Design-Checks in Car Manufacturing - Not Only a Question of Powerful Digital Validation Tools
6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME'08), pp. 175-178, Naples, (Italy), 2008.

Weyand, L.; Bley, H.
Future Challenges in Process/Resource Planning Due to Increasing (Product) Variants
The 41st CIRP Conference on Manufacturing Systems, pp. 235-238, Springer, Tokyo, (Japan), 2008.

kasten

2007


Bossmann, M.; Bley, H.; Weyand, L.; Schmitt, B.
Feature-Technologie in der integrierten Produktentstehung
Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), Ausgabe 10/2007, pp. 681 - 685, Carl Hanser Verlag, München, (Germany), 2007.

Bley, H.; Weyand, L.; Luft, A.
An Alternative Approach for the Cost-efficient Laser Welding of Zinc-coated Sheet Metal
Annals of the CIRP Vol. 56/1, pp. 17-20, Elsevier, Dresden, (Germany), 2007.

Bley, H.; Oberhausen, M.; Schmitt, B.
The laser induced fluorescence spectroscopy to detect organic layers in manufacturing processes
Proceedings of the 40th CIRP International Manufacturing Systems Seminar 2007, Liverpool, (England), 2007.

Avgoustinov, N.
Modelling in Mechanical Engineering and Mechatronics: Towards Autonomous Intelligent Software Models
Springer, London, (England), 2007.

Avgoustinov, N.; Bley, H.; Weyand, L.
Influence of the Software Models - Intelligence on their Flexibility, Reconfigurability and Agility
Proceedings of the 2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2007), pp. 433 - 442, ISBN 978-0-9783187-0-3, Toronto, (Canada), 2007.

Bley, H.; Zenner, C.; Bossmann, M.
Walking Worker Assembly Lines - A Contribution to Lean Production
Proceedings of the International Conference on Competitive Manufacturing, pp. 297-302, Stellenbosch, (South Africa), 2007.

Bossmann, M.; Avgoustinov, N.; Bley, H.
Role of the Information and Knowledge in Digital Enterprise Technology (section in the book "Digital Enterprise Technology")
CIRP Sponsored Conferences on Digital Enterprise Technology, ISBN-13: 978-0-387-49863-8, e-ISBN-13: 978-0-387-49864-5, Springer Science+Business Media, LLC, New York, (USA), 2007.

kasten

2006


Bley, H.; Zenner, C.
Variant-oriented Assembly Planning
Annals of the CIRP Vol. 55/1/2006, pp. 23-28, 2006.

Bley, H.; Zenner, C.
Implementation of a Consumption Control System
8th International Conference on The Modern Information Technology in the Innovation Processes of the Industrial Enterprises (MITIP 2006), Budapest, (Hungary), 2006.

Kiefer, J.; Müller, M.; Bley, H.
Concept of a Mechatronic-oriented Planning Process Chain in the automotive Industry
Proceedings of the 1st CIRP International Seminar on Assembly Systems, pp. 129-134, Stuttgart, (Germany), 2006.

Bley, H.; Avgoustinov, N.; Zenner, C.
Assembly Operation Planning by Using Assembly Features
Proceedings of the 1st CIRP-International Seminar on Assembly Systems, Pages 115-121, Universität Stuttgart, ISBN 3-8167-7213-7, Stuttgart, (Germany), 2006.

Avgoustinov, N.; Bossmann, M.; Bley, H.
Supporting the Assembly Planning by Means of Features and their Influence on the Development Process
CIRP - Journal of Manufacturing Systems, Vol. 35 No 3, pp. 257-266, International Institution for Production Engineering Research (CIRP), Aachen, (Germany), 2006.

Avgoustinov, N.; Bley, H.
Incorporation of Computational Intelligence into Assembly Planning Software
Proceedings of the CIRP Conference on Intelligent Computation in Manufacturing Engineering (ICME), University of Neaples, ISBN 88-95028-01-5, Ischia (Naples), (Italy), 2006.

Deubel, T.; Zenner, C.; Bley, H.; Weber, C.
Adaptation of a new Design Method for the Requirement-Driven Planing of Manufacturing Systems.
Paper No. 10061, pp. 529-534 (Full Paper, CD-ROM) Session TC-1: Design of Manufacturing Systems (herausgegeben von P. Gu, D. Xue, A. Ramirez-Serrano, S. Park, & D. Fletcher), (Canada), 2006.

Bley, H.; Fischer, N.; Oberhausen, M.
Measuring Organic Layers on Surfaces
Annals of the German Academic Society for Production Engineering, WGP, 2006.

Bley, H.; Oberhausen, M.
New metrological approaches for inline monitoring of cleaning and coating state of technical surfaces
Proceedings of the 39th CIRP International Seminar on Manufacturing Systems, pp.511-516, Ljubljana, (Slovenia), 2006.

Bley, H.; Oberhausen, M.
Metrological Approaches for Meeting the Requirements of Clean Production
Proceedings of the 13th CIRP International Conference on Life Cycle Engineering, pp.619-623, Leuven, (Belgium), 2006.

Bley, H.; Bossmann, M.
Automated Assembly Planning Based on Skeleton Modelling Strategy
Precision Assembly Technologies for Mini and Micro Products, pp.121-131, IFIP International Federation for Information Processing, Springer Verlag, 2006.

Bley, H.; Fritz, J.; Zenner, C.
Die zwei Seiten der Digitalen Fabrik
Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), Jahrg 101 (2006) 1-2, pp. 19-23, Carl Hanser Verlag, München, (Germany), 2006.

Bley, H.; Bossmann, M.
Improved Manufacturing Planning based on Localisation of Product Synergy Effects by the Use of Feature Technology
Cirp Journal of Manufacturing Systems, Vol 35, No1, pp. 55-61, 2006.

kasten

2005


Kiefer, J.; Schmidgall, G.; Bär, T.; Bley, H.
Integrierte digitale Planung mechatronischer Produktionssysteme in der Automobilindustrie
VDI Fachtagung - Mechatronik 2005 - Innovative Produktentwicklung VDI Bericht 1892, pp. 995-1011, 2005.

Bley, H.; Oberhausen, M.; Behrning, S.
Cleaning and Coating Control of Technical Surfaces - State of the Art and New Developments
Proceedings of the 42nd wfk Detergency Conference, Düsseldorf, (Germany), 2005.

Avgoustinov, N.; Bley, H.
Towards Integration by Design
International PACE Forum Digital Manufacturing, Partners for the Advancement of Collaborative Engineering Education (PACE), Darmstadt, (Germany), 2005.

Bley, H.; Bossmann, M.
Skelettmodelle in der Produktentwicklung und Produktionsplanung
Zeitschrift für wirtschaftlichen Fabrikbetrieb, Ausgabe 09-2005, pp. 477-480, 2005.

Bley, H.; Bossmann, M.
Standardisierte Produktmodell für die automatisierte Montageplanung
wt Werkstatttechnik - Ausgabe 09-2005, pp. 627-631, 2005.

Bley, H.; Bossmann, M.; Zenner, C.
Advances towards an integrated product and production development process
Proceedings of 2. German - Israeli Symposium for Design and Manufacture - Advances in Methods and Systems for Products and Processes, pp. 129-137, Berlin, (Germany), 2005.

Bley, H.; Oberhausen, M.; Fischer, N.
Application of optical measurement systems to monitor the lubricant layer
Proccedings of the 2nd International Conference on Manufacturing Engineering (ICMEN), Halkidiki, (Greece), 2005.

Bley, H.; Zenner, C.
Coupling of Assembly Process Planning and Material Flow Simulation
Proceedings of the 2005 IEEE International Symposium on Assembly and Task Planning (ISATP2005), Montréal, (Canada), 2005.

Bley, H.; Zenner, C.
Feature-based Planning of Reconfigurable Manufacturing Systems by a Variant Management Approach
3rd International CIRP Conference on Reconfigurable Manufacturing, Ann Arbor, (USA), 2005.

Fischer, N.; Bley, H.
Process Reliability by Using a Contamination Monitoring System
Proceedings of the 38th CIRP International Seminar on Manufacturing Systems, Florianopolis, (Brazil), 2005.

Fischer, N.; Oberhausen, M.; Bley, H.
Controlling the surface quality of a steel sheet by monitoring the lubricant layer
steel research international, No. 76, 2/3 2005, pp. 187-191, Stahleisen GmbH, 2005.

Bley, H.; Zenner, C.; Bossmann, M.
Intelligent manufacturing by enhanced product models
Advanced Materials Research Vols. 6-8, pp. 295-303, Trans Tech Publications Ltd., 2005.

Bley, H.; Zenner, C.
Handling of Process and Resource Variants in the Digital Factory
CIRP Journal of Manufacturing Systems, Vol 34 (2005), No. 2, pp. 187-194, 2005.

Bley, H.; Franke, C.; Zenner, C.
Variant Management in Production Planning
CIRP Journal of Manufacturing Systems, Vol 34 (2005), No 1, pp. 1-8, 2005.

kasten

2004


Bley, H.; Bossmann, M.; Zenner, C.
Flexible Process Models in Manufacturing based on Skeleton Product Models
Preprints of IFAC-MIM Conference on Manufacturing, Modelling, Management and Control, Athens, (Greece), 2004.

Bley, H.; Franke, C.
Integration of Product Design and Assmbly Planning in the Digital Factory
Annals of the CIRP Vol. 53/1/2004, pp. 25-30, 2004.

Bley, H.; Franke, C.; Zenner, C.
Die Digitale Fabrik: Produktionsplanung optimieren
mesh - Magazin für Wissens- und Informationsdiskurs, April 2004, pp. 11-13, Verlag Fachbuch, Esslingen, (Germany), 2004.

Bley, H.; Franke, C.; Zenner, C.
Integration of Product Design and Assembly Planning By the Use of Assembly Features
Proceedings of the 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, pp.319-324, Sorrento, (Italy), 2004.

Bley, H.; Reinhart, G.; Seeliger, G.; Bernardi, M.; Korne, T.
Appropriate Human Involvement in Assembly and Disassembly
CIRP Annals 2004 Manufacturing Technology Vol 53/2-2004, pp. 487-509, 2004.

Bernardi, M.; Bley, H.; Schmitt, B.
Integrating a Mechatronics-oriented Development Process into a Development Department
Proceedings of the 37th CIRP International Seminar on Manufacturing Systems, pp. 265-270, Budapest, (Hungary), 2004.

Bley, H.; Zenner, C.
New Approaches for Data Collection within Life Cycle Management
Journal of Production Engineering And Computers, Volume 6 Number 7 2004, pp. 101, 2004.

Bley, H.; Franke, C.; Zenner, C.
The User as the Main Focus for the Actual Realization of the Digital Factory
International Conference on Competitive Manufacturing, pp. 337-342, Stellenbosch, (South Africa), 2004.

Avgoustinov, N.; Bley, H.
Web-based Process Modelling for the Digital Factory
CIRP - Journal of Manufacturing Systems, Vol. 33 No 1, pp. 77-82, International Institution for Production Engineering Research (CIRP), Aachen, (Germany), 2004.

Avgoustinov, N.
Product and Process Modelling: System-centred vs. Model-centred Approach
CIRP - Journal of Manufacturing Systems, Vol. 33 No 5, pp. 437-444, International Institution for Production Engineering Research (CIRP), Aachen, (Germany), 2004.

kasten

2003


Bley, H.; Behrning, S.
IRCAS - Methode zur quantitativen Qualifizierung der Reinheit technischer Oberflächen
magazin forschung, Ausgabe 2/2003, pp. 8-14 - Universität des Saarlandes, 2003.

Bley, H.; König, H.; Roth, N.
Die Fabrik der Gegenwart - ein weltumspannendes Netzwerk
ZWF-Zeitschrift für wirtschaftlichen Fabrikbetrieb, Ausgabe 11/2003, pp. 583-588, Carl Hanser Verlag, München, (Germany], 2003.

Bley, H.; Franke, C.
Continuity of Assembly Process Planning in the Digital Factory
Proceedings of the ProSTEP iViP Science Days 2003, pp. 124-131, Dresden, (Germany), 2003.

Bley, H.; Weber, C.; Hirt, G.
Progress in Virtual Manufacturing Systems
Proceedings of the 36th CIRP International Seminar on Manufacturing Systems, Saarbrücken, (Germany), 2003.

Braun, P.; Fischer, N.; Bley, H.
Detection of Errors in Case Hardening Processes Brought on by Cooling Lubricant Residues
Proceedings of the 2003 IEEE International Symposium on Assembly and Task Planning (ISATP2003), pp. 187-191, Besancon, (France), 2003.

Avgoustinov, N.; Bley, H.
Distributed Virtual Enterprises (DVE) in Modelling, Simulation and Planning
Proceedings of the 36th CIRP International Seminar on Manufacturing Systems, pp. 123-129, Saarbrücken, (Germany), 2003.

Bernardi, M.; Bley, H.; Schmitt, B.
Change from domain-oriented to mechatronical system development in small and medium sized enterprises
Proceedings of the 36th CIRP International Seminar on Manufacturing Systems, pp. 441-446, Saarbrücken, (Germany), 2003.

Bernardi, M.; Bley, H.; Schmitt, B.
Restructuring service of repair capable products to optimize useful life
CIRP Life Cycle Seminar 2003, Copenhagen, (Denmark), 2003.

Fischer, N.; Behrning, S.; Bley, H.
Remote Analytical System for in Process Measurement of Surface Contamination
Sensor 2003, Proceedings of the 11th International Conference, pp. 299-304, Nürnberg, (Germany), 2003.

Bernardi, M.; Bley, H.; Schmitt, B.; Zenner, C.
Assembly planning of mini and micro products enhanced by an integrated product and process model
Proceedings of the IPAS 2003 (International Precision Assembly Seminar), pp. 31-38, Bad Hofgastein, (Austria), 2003.

Bley, H.; Franke, C.; Zenner, C.
Integrated Data Management and Variant Management - Milestones on the Way to the Digital Factory
Production Engineering, Volume X/1 (2003), Annals of the German Academic Society for Production Engineering, pp. 105-108, 2003.

kasten

2002


Bär, T.; Zenner, C.; Bley, H.; Haasis, S.
Verschmelzen digitale Prozessplanung und Ablaufsimulation?
CAD-CAM Report 12/2002, pp. 34-38, Dressler-Verlag, Heidelberg, (Germany), 2002.

Bley, H.; Franke, C.
The Digital Factory - A Platform for Improving the Agility of Production
7th International Pacific Congress on Manufacturing and Management, Volume I, pp. 452-457, Bangkok, (Thailand), 2002.

Avgoustinov, N.; Bley, H.; Franke, C.
Feature-based Knowledge Representation for Assembly Process Modelling
Proceedings of the 3rd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (ICME 2002), pp. 621-626, Ischia (Naples), (Italy), 2002.

Fischer, N.; Bley, H.; Braun, P.
Process safeguarding throughout the product life cycle
CIRP Annals 2002 - Manufacturing Technology - Vol. 51/1, pp. 41-44, San Sebastian, (Spain), 2002.

Bernardi, M.; Bley, H.; Schmitt, B.
New approaches for developing mechatronical products in multidisciplinary teamwork
Proceedings of the 35th CIRP International Seminar on Manufacturing Systems, pp. 327-332, Seoul, (Korea), 2002.

Bley, H.; Avgoustinov, N.; Franke, C.
Towards Feature-based Intelligent Assembly
Production Engineering, Volume IX/1 (2002), Annals of the German Academic Society for Production Engineering, pp. 97-100, 2002.

kasten

2001


Bley, H.; Jung, D.
Practise and process oriented (PPO) optimization model for the systematic and continuous improvement of complex industrial processes
Proceedings of the International Conference on Competitive Manufacturing COMA'01, pp. 111-118, Stellenbosch, (South Africa), 2001.

Bley, H.; Franke, C.
Model Management and Model Reuse in Heterogeneous Simulation Environments
Production Engineering, Volume VIII/2 (2001), Annals of the German Academic Society for Production Engineering, pp. 63-66, 2001.

Behrning, S.; Bley, H.; Fischer, N.
Oberflächenreinheitsmessung nach MMKS-Bearbeitung
ZWF-Zeitschrift für wirtschaftlichen Fabrikbetrieb, Ausgabe 11-12/2001, pp. 593-595, Carl Hanser Verlag, München, (Germany), 2001.

Bley, H.; Braun, P.
Method to find correlations between contaminations on surfaces by cooling lubricants and soft spot formations
Proceedings of 1st International Seminar on Progress in Innovative Manufacturing Engineering PRIME 2001, pp. 393-396, Sestri Levante, (Italy), 2001.

Bley, H.; Braun, P.
Entwicklung einer Methode zur Findung einer Korrelation von ölbasierter Oberflächenkontamination und Härteergebnis
Tagungsband zu: Journees franco - allemandes ATTT/AWT: Wärmebehandlung beginnt an der Oberfläche, Belfort, (France), 2001.

Bley, H.; Franke, C.
Assembly system design based on automated process modeling
Proceedings of the 34th CIRP International Seminar on Manufacturing Systems, pp. 39-44, Athens, (Greece), 2001.

Bley, H.; Bernardi, M.; Franke, C.; Seel, U.
Process-based assembly planning using a simulation system with cell calibration
Proceedings of the ISATP 2001 (International Symposium on Assembly and Task Planning), pp. 116-121, Fukuoka, (Japan), 2001.

Bley, H.; Seel, U.
Improving offline programming using industrial robots for cell calibration - A new approach to using simulation systems for assembly planning
Proceedings of the 32nd International Symposium on Robotics (ISR 2001), Volume II, pp. 838 - 843, Seoul, (Korea), 2001.

Kim, J.; Pyun, J.C.; Lee, H.H.; Bley, H.; Park, J.-.O.
Development af a novel automated ELISA analyser based on an electronic detector
Proceedings of the 32nd International Symposium on Robotics (ISR 2001), Volume I, pp. 439 - 443, Seoul, (Korea), 2001.

Bley, H.; Franke, C.
Integration von Produkt- und Produktionsmodell mit Hilfe der Digitalen Fabrik
wt Werkstattstechnik, Ausgabe 04/2001, pp. 214-220, Springer-VDI-Verlag, Düsseldorf, (Germany), 2001.

Behrning, S.; Bley, H.; Zapp, M.; Janocha, H.
Surface Inspection of Machined Parts Using a Wavelet-Based Vision
Proceedings of the 34th CIRP International Seminar on Manufacturing Systems, pp. 111-114, Athens, (Greece), 2001.

Bley, H.; Behrning, S.
FT-IR Spectroscopy for Quantifying Surface Cleanliness
Production Engineering, Volume VIII/1 (2001), Annals of the German Academic Society for Production Engineering, pp. 41-44, 2001.

Behrning, S.; Bley, H.
A Flexible Method for Detecting and Quantifying Organic Films
Proceedings of the 8th International Conference on Sheet Metal, Leuven, (Belgium), 2001.

Behrning, S.; Bley, H.
Cleanliness Inspection of Technical Surfaces: A New Approach Gaining Quantitative Data
Proceedings of the International Conference on Competitive Manufacturing COMA'01, pp. 89-96, Stellenbosch, (South Africa), 2001.

kasten

2000


Bley, H.; Oltermann, R.; Wuttke, C.C.
Distributed model management system for material flow simulation
Journal of Materials Processing Technology, Volume 107 (2000), pp. 478-484, ELSEVIER Science B. V., 2000.

Bley, H.; Franke, C.
Integration von Produkt- und Produktionsmodell mit Hilfe der Digitalen Fabrik
VDI-Berichte 1569, Produkte entwickeln im realen Umfeld, pp. 181-198, VDI-Verlag, Düsseldorf, (Germany), 2000.

Bley, H.; Franke, C.; Wuttke, C.C.
Simulationsmanagement in der Produktion
ZWF-Zeitschrift für wirtschaftlichen Fabrikbetrieb, 10/2000, pp. 487-491, Carl Hanser Verlag, München, (Germany), 2000.

Avgoustinov, N.
Implementation of 4D Machining Simulation in Virtual Reality over Internet
16th International Conference on Computer-aided Production Engineering CAPE 2000, p. 105-113, Professional Engineering Publishing Limited, Edinburgh, (Scotland), 2000.

Avgoustinov, N.; Bley, H.
Method for Reduction of Machining Time for the "Shift and re-machine" Concept by Simulation of NC-Programs in Virtual Reality
16th International Conference on Computer-aided Production Engineering CAPE 2000, pp. 123-129, Professional Engineering Publishing Limited, Edinburgh, (Scotland), 2000.

Bley, H.; Franke, C.; Wuttke, C.C.
New strategies and tools for increasing simulation efficiency
CIRP Annals 2000 - Manufacturing Technology - Vol. 49/1, pp. 339-342, Sydney, (Australia), 2000.

Bley, H.; Franke, C.; Ostermann, A.; Wuttke, C.C.
Methods and Tools for the Building of Huge Simulation Models
Proceedings of the 2nd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (ICME 2000), pp.33-41, Capri, (Italy), 2000.

Bley, H.; Franke, C.; Wuttke, C.C.; Gross, A.
Automation of Simulation Studies
Proceedings of the 2nd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (ICME 2000), pp.89-94, Capri, (Italy), 2000.

Bley, H.; Franke, C.; Wuttke, C.C.
Solving the Information Management Problem in the Digital Factory
Proceedings of the 33rd CIRP International Seminar on Manufacturing Systems, pp. 357-362, Stockholm, (Sweden), 2000.

Bley, H.; Franke, C.; Wuttke, C.C.
Integration der operativen Ebenen in Simulationsprojekte
Industrie Management 2/2000, pp. 13-17, 2000.

Avgoustinov, N.
VRML as Means of Expressive 4D Illustration in CAM Education
Future Generation Computer Systems (special issue of the magazine), Elsevier, 2000.

Behrning, S.; Bley, H.; Braun, P.
Method for Acquiring Values Describing Surface Cleanliness
Proceedings of the 10th International Colloquium on Surfaces, pp. 230 - 238, Chemnitz, (Germany), 2000.

kasten

1999


Bley, H.; Seel, U.
Simulation of assembly systems including process measurement data
Proceedings of the 32nd CIRP International Seminar on Manufacturing Systems, pp. 339-348, Leuven, (Belgium), 1999.

Behrning, S.; Bley, H.
Innovative High-Performance Process for Dry Manufacturing of Sheet Metal Armatures and their Integrated On-Line Cleanliness Examination
Proceedings of the 7th International Conference on Sheet Metal 1999, pp. 229 - 238, Erlangen-Nuremberg, (Germany), 1999.

Bley, H.; Braun, P.; Wuttke, C.C.
Materialflußsimulation verbessert Logistik
Blech Rohre Profile, Ausgabe 9/1999, pp. 46-53, Verlag Meisenbach, Bamberg, (Germany), 1999.

Bley, H.; Wuttke, C.C.
Multiple use of simulation models for production systems
Proceedings of the 32nd CIRP International Seminar on Manufacturing Systems, pp. 379-388, Leuven, (Belgium), 1999.

Bley, H.; Braun, P.; Wuttke, C.C.
Simulation als Werkzeug zur Optimierung inner- und zwischenbetrieblicher Logistik in der Blechverarbeitung
Tagungsband zum EFB-Kolloquium'99, Fellbach, (Germany), 1999.

Avgoustinov, N.
VRML as Means of Efficient 4D Machining Simulation in Intranet/Internet
X Workshop on Supervising and Diagnostics of Machining Systems, Innovative and Integrated Manufacturing, 21.-26.3.1999, Oficyna Wydawnicza, Politechniki Wroclawskiej, Karpacz, (Poland), 1999.

Bley, H.; Jung, D.; Klär, P.
Modelling Quality in Complex Processes - Optimization of a Powder Metallurgical Process using DoE
Proceedings of the International Conference on Quality Manufacturing, pp. 1-7, Stellenbosch, (Südafrika), 1999.

Bley, H.; Oltermann, R.; Wuttke, C.C.
Distributed Model Management System for Material Flow Simulation
Proceedings of the 15th International Conference on Computer-Aided Production Engineering, pp. 657-662, Durham, (England), 1999.

Bley, H.; Oltermann, R.; Thome, O.; Weber, C.
A tolerance system to interface design and manufacturing
Proceedings of the 6th CIRP International Seminar on Computer Aided Tolerancing, pp. 149-156, Enschede, (Netherlands), 1999.

Avgoustinov, N.; Bley, H.
Acquisition and Organization of Conversion-Related Knowledge
Proceedings of the International Seminar on Quality Manufacturing, pp. 150-156, Stellenbosch, (South Africa), 1999.

Bley, H.; Jung, D.
Design and Application of a Quality Management Network Model for the Assurance of Quality Affecting Processes Demonstrated in the Case of PowderMetallurgy
CIRP - Journal of Manufacturing Systems, Vol. 29, No. 4/99, pp. 357-361, WISU Verlag Aachen, (Germany), 1999.

Avgoustinov, N.
Virtual Shaping and Virtual Verification of NC-Programs
CIRP - Journal of Manufacturing Systems, Vol. 29, No. 4/99, pp. 287-292, WISU Verlag Aachen, (Germany), 1999.

Avgoustinov, N.; Bley, H.
Computer Aided Information Exchange for Manufacturing Software Systems
CIRP - Journal of Manufacturing Systems, Vol. 29, No. 3/99, pp. 247-252, WISU Verlag Aachen, (Germany), 1999.

kasten

1998


Bley, H.; Nickels, T.; Schmidt, J.
Mutuals Effects in a Sequence of Cutting and Cleaning
CIRP - Journal of Manufacturing Systems, Vol. 27, No. 2/98, pp. 153-160, WISU Verlag Aachen, (Germany), 1998.

Bley, H.; Wuttke, C.C.; Kontz, M.
Automatic Solution Generator for Complex Logistical Planning Problems
Proceedings of the CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (ICME 98), pp. 297-302, Capri, (Italy), 1998.

Bley, H.; Behrning, S.
Methods for Qualitative and Quantitative Analysis of Lubricants and Contamination on Formed Surfaces
Proceedings of the 6th Conference on Sheet Metal, Vol I, pp.343-35, Enschede, (Netherlands), 1998.

Bley, H.; Oltermann, R.
Determination of technological data during NC programming based on CAD-integrated tolerances
Proceedings of the 14th International Conference on Computer-Aided Production Engineering, pp. 143-148, Tokyo, (Japan), 1998.

kasten

1997


Bley, H.; Schmidt, J.
Kühlschmierstoffe auf zerspanten Oberflächen - Untersuchungen zur Definitionvon Meßgrößen an Grauguß-Werkstücken
wt Werkstattstechnik, Ausgabe 7/8-97, pp. 386-390, Springer-VDI-Verlag, Düsseldorf, (Germany), 1997.

Bley, H.; Seel, U.
Featurebasierte Montage - Konzepte und Realisierungsbeispiele für den Datenaustausch in komplexen automatisierten Montagesystemen
VDI-Berichte 1322, Features verbessern die Produktentwicklung, pp.161-178, VDI-Verlag, Düsseldorf, (Germany), 1997.

Bley, H.; Wuttke, C.C.
Distributed Simulation Applied to Production Systems
CIRP Annals 1997 - Manufacturing Technology - Vol. 46/1, pp. 361-364, Tianjin, (China), 1997.

Bley, H.; Wuttke, C.C.
Logistikgerechte Produktentwicklung durch Kopplung von Produkt- und Produktionsprozeßmodellierung
VDI-Berichte 1357, Neue Generation von CAD/CAM-Systemen, pp. 243-262, VDI-Verlag, Düsseldorf, (Germany), 1997.

Bley, H.; Müller, A.; Oltermann, R.
Planning of Assembly Systems, Socio-technical Aspects and Project Control
CIRP - Proceedings on Manufacturing Systems, Vol. 26, No. 1/97, pp. 33-37, WISU Verlag Aachen, (Germany), 1997.

kasten

1996


Bley, H.; Jostock, J.; Stadelmeyer, V.
Approaches to integrating detailed job scheduling and manufacturing control
Proceedings of the CIRP Seminars Manufacturing Systems, Vol. 25, No. 4/96, pp. 359-365, WISU Verlag Aachen, (Germany), 1996.

Bley, H.; Seel, U.; Schmidt, J.
Möglichkeiten der Verwaltung von Montageprozessen unter Einsatz von Industrierobotern
Proceedings of the International Conference on Computer Integrated Manufacturing CIM 96, Vol. I, pp. 29-38, Zakopane, (Poland), 1996.

Bley, H.; Seel, U.
Solving Technical Problems in Assembly Systems Design
CIRP Annals 1996 - Manufacturing Technology - Vol. 45/1, pp. 11-15, Como, (Italy), 1996.

Bley, H.; Wuttke, C.C.; Oltermann, R.
Ansätze zur Integration von Detailarbeitsplanung, Fertigungssteuerung und Materialflußsimulation
magazin forschung, Ausgabe 2/1996 - Universität des Saarlandes Ausgabe 2/1996, 1996.

kasten

1995


Bley, H.; Jostock, J.; Rech, K.
Order Control by a Hierarchical, Self-organizing Computer System
CIRP Annals 1995 - Manufacturing Technology - Vol. 44/1, pp. 407-411, Enschede, (Netherlands), 1995.

Bley, H.; Stadelmeyer, V.
Decision Supporting Systems for Solving Planning Tasks
Flexible Automation and Intelligent Manufacturing, Proceedings of FAIM'95, 28. - 29. Juni, pp.142-15, Stuttgart, (Germany), 1995.

Bley, H.; Dietz, S.; Seel, U.
Aufbereitung von Wissen zur Auswahl von Montagemitteln
VDI-Berichte 1217, Wissensverarbeitung in Entwicklung und Konstruktion, pp. 159-178, VDI-Verlag, Düsseldorf, (Germany), 1995.

kasten

1994


Bley, H.; Mischo, A.
Aquisition und Implementierung von NC-Detailplanungswissen
Mechanika - International Conference on Computer Integrated Manufacturing, Z. 117, pp. 53-60, Zakopane, (Poland), 1994.

Bley, H.; Fox, M.
Grundlagen einer featurebasierten Montageplanung
Workshop "Feature Technology in Design and Manufacturing", 29.-30.8.1994, Vortrag Nr. 9, Universität des Saarlandes, 1994.

Bley, H.; Dietz, S.; Roth, N.; Zintl, G.
Knowledge of Selecting Assembly Cell Components and its Distribution to CADand an Expert System for Processing
CIRP Annals 1994 - Manufacturing Technology - Vol. 43/1, pp. 5-8, Singapore, (Singapore), 1994.

Bley, H.; Fox, M.
Entwicklung eines featurebasierten Konzepts zur Montageplanung
VDI-Berichte 1171, Serienfertigung feinwerktechnischer Produkte - von der Produktplanung bis zum Recycling, pp.231-250, VDI-Verlag, Düsseldorf, (Germany), 1994.

Bley, H.; Stadelmeyer, V.
Flexible Interface between Data Base Management Systems (DMBS) and a Decision-Support-System for Tool Selection
Proceedings of the CIRP Seminars Manufacturing Systems, Vol. 23, No. 2/94, pp. 245-252, WISU Verlag Aachen, (Germany), 1994.

Bley, H.; Mischo, A.
Representing Knowledge for NC-Programming
Proceedings of the CIRP Seminars Manufacturing Systems, Vol. 23, No. 1/94, pp. 52-63, WISU Verlag Aachen, (Germany), 1994.

kasten

1993


Bley, H.; Stadelmeyer, V.
Requirements for the Integration of Knowledge-based Tool Selection and Configuration into Computer Aided NC-Programming
Proceedings of the CIRP Seminars Manufacturing Systems, Vol. 22, No. 1/93, pp. 79-88, WISU Verlag Aachen, (Germany), 1993.

Bley, H.; Jostock, J.
Accident Handling in a Hierarchical Production Management System
Proceedings of the CIRP Seminars Manufacturing Systems, Vol. 22, No. 3/93, pp. 255-260, WISU Verlag Aachen, (Germany), 1993.

Bley, H.
Desarollo del Producto y Conformacion del Trabajo
Organizacion Industrial, Ano 1 / No. 1, 1993.

kasten

1992


Bley, H.; Dietz, S.; Müller, A.
Wirtschaftliche Montage durch montagegerechte Konstruktion und rechnerunterstützte Montageplanung
VDI-Berichte Nr. 999, Montage und Demontage, pp. 257-275, VDI-Verlag, Düsseldorf, (Germany), 1992.

Bley, H.; Mischo, A.; Stadelmeyer, V.
Wissensverarbeitung für die Fertigung - Ansätze, Lösungen und Erwartungen
Informationsmanagement im Betrieb 2000, Fachtagung im Rahmen der SaarbrückerTechnologie-Messe am 30.10.1992, Tagungsband pp. 71-86, Saarbrücken, (Germany), 1992.

Bley, H.; Dietz, S.; Müller, A.
Design and Realization of Flexible Automized Assembly Systems - A Computer Integrated Approach
Proceedings of CARs & FOF, 8th International Conference on CAD/CAM, Robotics and Factories of the Future, pp. 1745-1759, Metz, (France), 1992.

Bley, H.; Jostock, J.
Entwicklungstendenzen im Bereich Werkstattsteuerung
VDI-Z, 134, Ausgabe 1/1992, S. 32 - 38, Springer-VDI-Verlag, Düsseldorf, (Germany), 1992.

kasten

1991


Bley, H.
Die automatisierte Produktion - Stand und Entwicklung in der Fertigungsvorbereitung und in der Fertigungswerkstatt
in: A.-W. Scheer, CIM im Mittelstand, pp. 117-129, Springer-Verlag, 1991.

Bley, H.
Erzeugnisentwicklung und Arbeitsgestaltung
REFA Nachrichten 3/Juni 1991, S. 24 - 28, 1991

Bley, H.; Dietz, S.
The Development of a Knowledge-based System for the Selection of AssemblySystems
Proceedings of the CIRP Seminars Manufacturing Systems, Vol 20, No. 2/91, pp. 129-136, WISU Verlag Aachen, (Germany), 1991.

kasten

1990


Bley, H.
Anforderungen an die flexibel automatisierte Montage in einer CIM-Fabrik
magazin forschung, Ausgabe 2/1990 - Universität des Saarlandes, 1990.

Bley, H.
Die technisch-wirtschaftliche Entwicklung in der Oberpfalz und in Bayern
40 Jahre REFA- Bezirk Amberg 19.10.90, 1990.

Bley, H.
Produkte und Produktion sowie ihre Überwachung - Verbesserung der Qualität und Abbau von Belastungen
VDI-Berichte Nr. 813 , Schalltechnik'90, pp. 1-22, VDI-Verlag, Düsseldorf, (Germany) 1990.

kasten